Getting Started with CH32V003

After watching David Jones's YouTube "EEVblog 1524 - The 10 CENT RISC V Processor! CH32V003",
https://www.youtube.com/watch?v=L9Wrv7nW-S8&ab_channel=EEVblog
I had to learn more about this chip.

Where to get a CH32V003 development board

I ordered this board: along with the programmer and cable for $7.50:
https://www.aliexpress.us/item/3256805035436953.html

Repository for board with documentation and example code: https://github.com/wuxx/nanoCH32V003
The github repo's README.md file: https://github.com/wuxx/nanoCH32V003#readme
                  Schematic: https://github.com/wuxx/nanoCH32V003/blob/master/hardware/nanoCH32V003.pdf

I created a RISC-V folder under Documents like so:
C:\Users\Jim\Documents\RISC-V

While inside the RISC-V folder, I cloned the repository like so:
 git clone https://github.com/wuxx/nanoCH32V003.git

Inside the "doc" folder is the zipfile, CH32V003EVT.ZIP, with "EVT" folder inside.
Unzip the EVT folder into "doc", so you have the example code available.

CH32V003 website: http://www.wch-ic.com/products/CH32V003.html
The device on the development board is: CH32V003F4U6, with 18 GPIOs in a QFN20 package

MounRiver Studio IDE

Download the latest version of MounRiver Studio IDE from the official website:
http://www.mounriver.com/  and install it.

More info concerning the board

 According to the schematic, the LED is connected to PD6

WCH-LinkE v1.0

After plugging in the WCH-Link USB-Serial programmer, the device should display in Window Device Manager

The programmer comes with a 4-conductor cable, wire colors: brown (1), red (2), orange (3), yellow (4)

Notes & References

As noted in the YouTube EEVblog, the TSSOP20 package for this part appears to be pin
compatible with the STM8S003F3, https://www.st.com/resource/en/datasheet/stm8s003f3.pdf, at 1/3rd the price.
The UFQFPN20 package doesn't appear to be pin compatible.