STM32F103C8 (Blue Pill)
- ARM®32-bit Cortex®-M3 CPU
- Flash 64KB
- RAM 20KB
- 72 MHz max CPU frequency
- GPIO (32) with external interrupt capability
- 12-bit ADC (2) with 10 channels
- RTC
- Timers (4)
- I2C (2)
- USART (3)
- SPI (2)
- USB 2.0 full-speed
- CAN
Using Arduino Plugin
When used with the Arduino IDE as a plugin, the STM32 header files can be found here: C:\Users\Jim\Documents\Arduino\hardware\Arduino_STM32-master
The STM32F1 header files: C:\Users\Jim\Documents\Arduino\hardware\Arduino_STM32-master\STM32F1\system\libmaple\stm32f1\include\series C:\Users\Jim\AppData\Local\Arduino15\packages\stm32duino\hardware\STM32F1\2019.10.9\variants\generic_stm32f103c
STM32 Tools: C:\Users\jmerkle\AppData\Local\Arduino15\packages\stm32duino\tools\stm32tools\2019.10.9\win\stlink\ST-LINK_CLI.exe
The Arduino Plugin package doesn't include header files/libraries for the CAN Bus module
References:
Technical Reference Manual: https://www.st.com/content/ccc/resource/technical/document/reference_manual/59/b9/ba/7f/11/af/43/d5/CD00171190.pdf/files/CD00171190.pdf/jcr:content/translations/en.CD00171190.pdf https://wiki.stm32duino.com/index.php?title=Blue_Pill https://os.mbed.com/users/hudakz/code/STM32F103C8T6_Hello/ https://os.mbed.com/users/hudakz/code/CAN_Hello/
Using Atollic Studio and STM32CubeMX
Installation
Projects
- Blinky - Blink an LED
- Serial Output to terminal using FTDI module/cable
- Using I2C interface - APIs
- PWM - LED fading
- PWM - Servo control
- Serial Output to terminal using on-board USB interface
- Using SPI interface - APIs
- Using ADC to measure voltage